My Blog
A short description about your blog
- Participated in tours of the radiology departments for the Client at their client facilities and clinics.
- Participated in planning and kickoff activities for the ePI and RIS implementation projects.
- Supported Activation ADT 3NSMED interface for Lawson Point of Use.
- Coded Lawson Point of Use Charge File transfer interface.
- Supported Activation of the Lawson Point of Use Charge File Transfer Interface.
- Developed tentative resolution on location issues in Lawson Point of Use.
- Assisted with ADT testing and issues resolution
- Monitor the BETA environment CENTRAL MPI and Escalate the findings to the concerned.
- Worked on Access manager URL (#) and provided workaround for client.
- Worked on adding users as requested by client, but could not complete because the users where seen when imported the specified ldap user group. Waiting on client to comeback on this.
- Checked if Nextgate HL7 Binding component Supports IP Address configuration and provided the feedback,
- Checked for C32 Errors on BETA environment
- Started Installing SQL Server as part of MPI local Installation But not able to succeed (still investigating the cause).
- Researched USA charges issue with new segment ZFT. Worked to isolate issue and identify which charges didn’t cross out of DataGate. Wrote script to isolate those charges and prep for resend through DataGate. Once tested and placed in production, resent charges from 2/17 through 2/20. Modified to only send charges that DataGate dropped.
- Modified structure (ssc), id/filter (isc) and translation code (tsc). Tested new code and presented for approval.
- Updated SOP with Broker information that one of the Broker interfaces was going to be down.
- Worked with Client to move DG1000 – CSS Qsight ADT interface into production.
- Documented DataGate Change Control for CS managers (and others) and distributed for QC.
- Validated USA charges from time of SRA and looked good. Manipulated charges from 2/21 to 2/22 (time of SRA) and prepped them for resend. Client validated the resend and then resent the charges.
- Researched Intellicred to Soft interface and Fax number issue.
- Attended the Soft DataGate Issues Meeting.
- Presented DataGate Change Control to the CS Manager’s meeting.
- Researched NOVO ORC:8 isssue for Client.
- Researched CareFusion test interface (turns out that CF had issues with their side of the interface but took me a while to track it down…)
- Soft to GE Flow Cytometry reports were fixed. No DataGate changes needed.
- Received ticket number R214289 for the QS fetal monitoring ADT interface for IFH. No action on this yet.
- Coded fix for Intellicred to Soft Fax numbers DG1005. Initially Tested. Will test with Monday afternoon’s data so validation can take place.
- Worked on IM 403702 – Soft Blood Bank record issue. Searched all over DataGate and could not find this BB record. Turns out it never left Soft and it is a work flow process issue.
- I removed the test interface from Intellicred to GECE so MSOW could be tested.
- Reviewed Soft Fax test data output.
- Worked on a down Powerscribe interface (PS_BU_O). Had to work with the vendor for them to find the right interface.
- Worked on the GECE to EKO interface in test to help find some records.
- Worked on researching an issue where Soft says they did not receive a cancel order originating from Picis. We were able to show that the record did go across. Early next week, I will run the script that creates a chronologically view of the log data for those interfaces.
- Client requested I look at a Powerscribe issue. Research found this issue to be with Powerscribe. Application support notified.
- Supported Activation ADT 5CPSU interface for Lawson Point of Use.
- Worked on location resolution for Lawson Point of Use.
- Assisted with ADT testing and issues resolution
- Received and tested additional sets of test PDF/HL7 samples and sent them through the transformation BOB all the way through to Meditech. Updated and refined the transformation BOB e*Gate code to include detailed comments for all 3 private methods and for the main body of code.
- Continued attempts to implement “SSH Tunneling” option of the Batch e*Way for this interface and keep running into the “Error parsing response” exception. Ultimately decided to abandon this option and pursue option to implement Java Process/Runtime objects calls to .BAT with the .BAT scripted to use Putty “psftp” to establish the SFTP connection.
- Supported client’s effort to implement MoveIT secure FTP via e*Gate call to MoveIT .BAT script.
- Supported client’s troubleshooting of the greater than 1 OBX issue experienced on-call with Transolutions reports interface. Tested e*Gate’s ability to handle greater than 65K OBX.5 values and successfully proved that e*Gate’s HL7 parsing library supports an OBX.5 value that is 10 times that size.
- Created first draft of the Escription production implementation plan and reviewed it in advance of her production implementation.
- Fix for Rad orders going to Soft – Put into production.
- ADT interface for MAI – McKesson Pharmacy – Put into production.
- Soft ORC to Novo for IRL – Put into production.
- Updated SOP name and sent out with changes today.
- Scheduled time for Wednesday to review downtime with team.
- Scheduled GoToMeeting for Thursday morning downtime.
- Created spreadsheet from Qlikview for EDIS Interfaces.
- DOC mapping tables – Moved into production.
- Olympus ADT interface for MVH – Moved into production.
- Researched LW_Charges_I and LW_Adt_In errors in the errMsg.log. Created Change # to monitor changes to clear up bogus errors (#36317). Created Task #80620 for cleaning up test patient errors from LW_Charges_In and Mike Smith approved task. Created Task #80621 for cleaning LW_Adt_I xlate errors. Still researching Soft records in the errMsg.file.
- Reviewed moves for tomorrow and sent emails asking for changes to documentation.
- Presented Downtime plan for tonight to team and made changes.
- Emailed Downtime reminder.
- Met with client and reviewed new Soft issue. Waiting on client to send me recent example.
- Made the modifications to the production scripts for downtime.
- Made the modifications to the production monk files in preparation for downtime.
- Emailed team with updates for downtime and made hardcopies of documentation.
- Medicity Practice Go Live with ADT, RAD and Transcribed reports
- Issue identification and Resolution
Thursday, February 17, 2011
- Participated in the scheduled production downtime – 1:30 AM to 3:30 AM.
- Moved scripts to handle only one port per dgsrvr process into production.
- Cleaned up orphan entries in the production monk files.
- Created Audit Report and distributed.
- Ran new volume report and distributed
- Researched how Imagecast integrates with other Inova systems.
- Researched Flow Sheet reports from Soft that are not formatted correctly for GECE. The segments are coming out of Soft in a very chopped up manner and not consistent. Reported findings back to Frank.
- Monitored Production in the afternoon.
- Attended the Soft Interface Issues meeting.
- Moved DG1014 – ZPM for MAI interface into production.
- Moved DG1015 – Muse HPF change into production
Friday, February 18, 2011
- Created Audit Report and distributed.
- Research Intellicred question for Tom.
- Reported on Imagecast to Mariela.
- Worked with Gigi on Qlikview.
- Attended Cloverleaf web services presentation.
- Left for airport around 1:30 PM.
- Worked with Denise Allen from airport on USA charges.
- Assisted with configuration of organizations, facilities, user accounts in ProAccess 5.3 CERT environment in order for testing by CHS application teams. Worked with Medicity Director of Deployment on-site to prioritize issues and review project deliverables & timelines.
- Application Testing with tracking of 5.1 CERT issues identified during application testing on SharePoint, assisted Medicity in researching issues in CERT environment along with Client application teams, performed re-testing after deployments to confirm issues were resolved.
- Documentation of application testing & re-testing issues.
- Project Management related reporting and correspondence with Medicity HIE project.
- Helped diagnose and resolve problem where order cancels from Cerner not making it over to Natus.
- Generated every cardiology related report type in order to confirm they could be loaded into imaging.
- Generated reports showing un-aliased HL7 fields coming from Cerner.
- Generated reports to help reconcile orders going to GE PACS.
- Worked with team to address problems where GE PACS was rejecting results from Cerner.
- Created executable program to allow SMMC to isolate False Duplicates in their Dup MRN report.
- Completed build and testing on AEGT19 production server of the two collaboration / two step business rules to complete the “put” followed by “get” for this SFTP interface. Created folder structure on AEGT19 to support the file movement and archiving, created final versions of the Putty “psftp” .BAT command scripts and supporting e*Gate code to call the command scripts. Completed multiple successful tests of the final code using test files and feedback from Sally Boucher from Wealth Engine. Also, created detailed e*Gate code description document in order to pull together all e*Gate code components along side the corresponding .BAT scripts for each business rule step (put/get).
- Datanex FTP over SSH Interface for DRA tool implementation completed build and testing on AEGT19 production server of the three collaboration / three step business rules to complete the “put” followed by “get” followed by “put” for this SFTP interface. Created folder structure on AEGT19 to support the file movement and archiving, created draft versions of the Putty “psftp” .BAT command scripts and supporting e*Gate code to call the command scripts. Used draft versions of scripts for now to send/receive from my locahost FTP server because we still do not have SFTP connectivity to Datanex. Also, created detailed e*Gate code description document in order to pull together all e*Gate code components along side the corresponding .BAT scripts for each business rule step (put/get/put).
- Datanex FTP over VPN tunnel interface completed with e*Gate build and test on AEGT19 of new collaboration to support FTP’s to Datanex for the new “pharmacy charge” files extracted from Meditech. Completed this build for both facility locations.
- Escription VPN tunnel troubleshooting - Participated in ongoing efforts with the team to resolve connection issues for the Escription ORU/Reports interface from Escription to Meditech. After many meetings and multiple solution path attempts, we were able to identify a VPN rule that was implemented but did not belong. The connection issues were resolved late in the week allowing Escription production pilot testing to continue.
- Monitor the BETA environment and Escalate the findings to the concerned.
- Provided explanation for Active Directory Queries and listed the IHS with the Existing Active Directory roles that are currently configured in AM on ditdev5.
- Worked on PHRWebservice EJB jar file updation and deployment on ditdev2.
- Worked on executing DB programs on ditdev5 as a part of roubleshooting issue.
- Review the Install ManualCentralMPI core Doc as requested by client.
- Worked with Medicity and Allscripts to resolve handshaking issues with low level TCP/IP connectivity. Medicity Team identified issue with MSH header in MSH.4. Reconfiguration resolved issue with messages being received and ACK being processed correctly by Allscripts.
- Assisted with configuration of organizations, facilities, user accounts in ProAccess 5.3 CERT environment in order for testing by CHS application teams. Worked with Medicity Program Manager Kevin Sigafoes on-site to deploy & test 5.3 CERT, and re-test issues from 5.1 CERT.
- Reviewed testing issues and supported HL7 trigger events for ProAccess v5.3
- Application Testing with tracking of 5.1 CERT issues identified during application testing on SharePoint, assisted Medicity in researching issues in CERT environment along with application teams, performed re-testing after deployments to confirm issues were resolved.
- Completed ProAccess Code-set Maintenance Policy documentation, along with documentation of application testing & re-testing issues.
- Project Management related reporting and correspondence for Medicity HIE project.
- Assisted Intersystems Ensemble user to access and manage database tables in a linked SQL database.
- Medicity test Plan for Laboratory orders and results sent to Practice for any specific test scenarios they want included before finalizing plan and distributing as the master plan.
- Created whitepaper showing in bullet form Practice Challenges and Novo Grid Benefits for interested Practices.
- Worked with Medicity and Allscripts to resolve handshaking issues with low level TCP/IP connectivity. Medicity Team identified issue with MSH header in MSH.4. Reconfiguration resolved issue with messages being received and ACK being processed correctly by Allscripts.
- Added new provider to Medicity GRID for existing live Practice. Providers started receiving results immediately.
- eGate IP/port assignments sent to Medicity for Lab Orders connectivity.
- Intersystems Ensemble client having issues where messages are not being passed. Receiving error, “ERROR <EnsEDIHL7>ErrEndBlock: Received unexpected EndBlock 'MSA|AR|er' in input "MSA|AR|er", expected 'er, on |TCP|41009|18808990'” Informed client that on the message itself that errored, typically, if a message is in error, it's typically because of message structure or the receiving application has a preliminary validation check on segment components before accepting the message. You should never find this while message flow is within Ensemble. In looking at the little bit of the MSA that was provided, the MSA.3 is interesting. This will be your message control ID from the MSH.10 of the original message. Here, it had 'er'. I've tried to recreate this error through the testing module with no success. I've also reissued the message 'as is' in ORMCTST, which reassigned the MSH.10 value and it processed correctly without issue. The message flowed successfully to the business operation.
- Assisted Medicity Live GE Centricity Practice in working their Link Logic errors.
- Allscripts Project Plan customization performed to align tasks with site objectives with Allscripts approval.
- Assisted client with understanding the low level protocols process with Eclipsys eLink interface engine.
- Researched issue with Mid-Level providers not being able to order labs in GE-Centricity. In working with the site, we created a work around, then addressed the cause. Found that there was a glitch with GE Centricity. Brought this to the attention of GE for resolution.
- Medicity Certificate of Acceptance executed by client for Lab results and GRID configuration.
- Medent Laboratory Interface Questionnaire submitted to lab for completion. This document is require for EMR interface development.
- Medent Clinician Request form submitted to Practice for completion. This document is required for EMR interface development.
- Develop and implement eGate interfaces for addition of OAL and OBIX systems.
- Develop and implement eGate interfaces for upgrades to PACS McKesson, SOFTLAB, Teletracking systems.
- Develop Epic interface using HL7 IHE for Medical Pump Device and Rosetta Table for Pump Devices.
- Develop DART (Database Access Retrieval Tool) interfaces to update and query SQL Server tables for Pump Device.
- Modify eGate generic TCP/IP code to facilitate Commit Level ACK on separate inbound to eGate port. (Allow eGate to handle ACK messages as Data)
- Application Testing with tracking of CERT issues identified during application testing on SharePoint, logged issues in Medicity Rally defect tracking system, escalated issues to Medicity and assisted in researching issues in CERT environment along with the site’s application team, performed re-testing after deployments to confirm issues were resolved.
- Documentation of application testing issues, completed documentation of data sets displayed on ProAccess tabs.
- Created resource matrix for Fortune 50 Company requiring assistance with their integration and implementation. Presented Orchestrate with a needs analysis detail 14 major systems with over 140 subset configurations. Orchestrate Healthcare resources ranked Experienced or SME level in each major system as well as the majority of subset data configurations.
- Worked with Allscripts on the configuration for data mapping for the lab compendium for Lab Orders and Results.
- Presented methodologies to provide filtering via location values in PV1.3 via Medicity for GE Centricity practice.
- Added additional users to the Medicity CERT and PROD GRID.
- Worked with Lab to complete the SAGE Non-Part development worksheet required for connectivity with Medicity.
- Researched issue with GE Centricity with a Thyroid Group Result. GE could not find the Preliminary, but only the Final. Found where both reports were sent to GE Centricity, but the Preliminary was incorrectly routed by GE Centricity. Configuration was corrected and tested. No further issues.
- Lessons Learned document created for GE Centricity EMR implementation and GO-LIVE. Scheduled conference with Medicity Team members to collaborate on the finalization of this document.
- Practice Node installed at second Pilot Practice without issue.
- Connectivity established between Allscripts and Medicity GRID.
- Assisting Practice with troubleshooting patients received that are not their patients. These range from new employees to internal coding mistakes by the Practice.
- Medicity Orders Planner completed by Laboratory and submitted.
- Installed Rhapsody version 4 on local server for client support and development.
- Application Testing involving the tracking of CERT issues identified during application testing on SharePoint, logged issues in Medicity Rally defect tracking system, escalated issues to Medicity and assisted in researching issues in CERT environment along with site application teams, performed re-testing after deployments to confirm issues were resolved.
- Setup & configured Nexus Manager for troubleshooting interfaces and data display issues using Nexus Manager.
- Performed documentation of application testing issues, started draft documentation of data sets displayed on ProAccess tabs.
- Project Management related reporting and correspondence with Medicity.
- Attended HIE Update meeting with HIE Team.
- ProAccess Product Enhancement Requests conference call w/ Medicity
- Held CERT Application Test Issues calls w/ Medicity and site.
- Completed EMR_MEDITECH_ORU Ensemble coding for migration from Meditech. Final unit compares completed with no issues.
- Completed FM-ADT_CNEXT Ensemble coding. Final unit compares completed with no issues.
- Created database table, functions, and business process to accomplish desired functionality for processing ADT from EPIC:
- For A05’s from Epic, using patient demographic information along with Expected Visit Date to determine if this A05 has been sent before.
- If the A05 has been sent earlier, block the message.
- If the A05 has not been sent earlier, store relevant information to table and then send message.
- General project related correspondence and reporting.
- Coordinated and participated in a web-demo of Orion Rhapsody with the team.
- Participated in planning calls for the onset of the RIS implementation project
- Conducted logfile analysis to determine patterns in the data flowing from A4 registration.
- Conducted analysis of log files to reconcile orders sent to radiology related downstream systems.
- Assisted with end-to-end testing with Muse. Verified reports show up in Cerner Powerchart.
- Assisted with manually pulling Hemodynamics reports over to Cerner Imaging.
- Assisted with the configuration of new dietary items and confirmed that they properly flowed over to CBORD,
- Participated in comprehensive ADT testing session to confirm that downstream systems properly reflect what was sent via HL7.
- Assembled training materials for Radiology Super User training. Participated in Super User training.
- eceived request from client to provide a list of report types that are available from local Meditech. Using production data archives (Meditech ITS Reports HL7 Outbound) created a spreadsheet that lists all of the report type mnemonics/descriptions available for sending to site and provided that list to client representative via email. Currently awaiting feedback/response to proceed with work to implement ITS reports interface.
- Worked this week to begin the process of back loading (90 days prior to go live) ADT, LAB and RX data from Meditech to Medmined. Using existing “feeder” e*Ways and a new JMS bridge from conversion to production, we set up configuration necessary to run the backload for ADT, LAB and RX.
- Continued development of the new e*Gate collaboration rule class to support the additional “vascular” report formats planned for implementation in February 2011. Received feedback from McKesson interface support person concerning the variable column width issue for report table data lines. In short, the column widths will continue to be variable. Began developing a modified design/coding strategy to accommodate the variable column widths that will now be expected. Confirmed by the end of the week through coding and testing for the “Arterial Duplex” report type that the new design/coding approach will work. Next week, will implement the new strategy for all report types.
- Received additional ADT questions from Sentry via their “Client Questions” web page. The questions required some research into HL7 ADT production message counts by type, so completed the research and confirmed that Sentry’s message counts matched the counts I came up with and then added responses to the “Client Question” web page.
- Integration Team Status – Attended weekly status meeting for the integration team.
- Wealth Engine FTP interface – Attended project kick off meeting.
- Medmined – Attended weekly status meeting for this project.
- Datanex – Attended weekly status meeting for this project.
- Datanex – Attended technical call for this project.
- CPACS Vascular Reports Interface – Received new set of sample PDF/HL7 pairs for additional report types. Continued development of the new e*Gate collaboration rule class to support the additional “vascular” report formats planned for implementation in February 2011.
- Escription ADT/Reports interface – Generally supported continued work on both the ADT and Reports interfaces. The focus shifted to the reports interface. Created new ETD for the ORU/Reports interface to use for the reports interface from Escription to Meditech.
- Hill Rom Census Extract FTP interface – Received additional details and clarifications describing the requirements for this interface. Developed and sent out an email listing the tasks required for the Meditech extract and for the e*Gate build for this interface.
- Wealth Engine FTP interface– Based on the status call discovered that Wealth Engine uses FTP over SSH for the secure FTP. Modified e*Gate build plan to use the Batch e*Way for Java which supports FTP over SSH. This means that we will not be using MoveIT script call solution that was implemented for the State of Illinois Lab Reporting interface.
- Application Testing - Tracking of CERT issues identified during application testing on CHS SharePoint, logged issues in Medicity Rally defect tracking system, escalated issues to Medicity and assisted in researching issues in CERT environment along with CHS application teams, performed re-testing after deployments to confirm issues were resolved.
- Nexus Interface Manager – setup & configured Nexus Manager for troubleshooting interfaces and data display issues using Nexus Manager.
- Documentation - Documentation of application testing issues, started draft documentation of data sets displayed on ProAccess tabs.
- Project Management related reporting and correspondence with Medicity.
- Created database table, functions, and business process to accomplish desired functionality for processing ADT from EPIC:
- For A05’s from Epic, using patient demographic information along with Expected Visit Date to determine if this A05 has been sent before.
- If the A05 has been sent earlier, block the message.
- If the A05 has not been sent earlier, store relevant information to table and then send message.
- General project related correspondence and reporting.
- Medicity Practice Go-Live with GE Centricity in place for one week with minimal issue.
- Found issue with OBR.28 where leading tilde was causing issue with dataflow. Found that an internal process using this field outside HL7 standards with no population of OBR.28.1 along with having to remove all data but the OBR.28.1 field for GE Centricity to accept, was causing the message to be blocked from delivery. Issue being monitored to catch and correct in the Medicity Novo Grid until fix is put in place next week.
- Research through E-Gate found an issue with header/trailer population on dropbox results. Medicity found specific elements did not migrate from CERT to PROD. Corrected with no further issues.
- At Go-Live, found one provider had an ID mismatch. Corrected in the NovoGRID with no further issue.
- Completed Provider Mapping for Application Testing (Star, IDX, Rad Application Testing: tracking of CERT issues identified during application testing on CHS SharePoint, escalated issues to Medicity and assisted in researching issues in CERT environment and with CHS application teams, coordinated issues meeting with CHS teams & Medicity, logged issues in Medicity Rally defect tracking system.
- Assisted with getting CHS sign-off on Medicity Transcription Specifications
- Documentation: documentation of application testing issues, second draft of CHS Roadmap in PowerPoint, updated Application Test Status document.
- Project Management related reporting and correspondence with Medicity.
- Made site trip to review presentations from engine vendors, as part of process to help Inova migrate from DataGate.
- Wrote Perl script to create reports on HL7 transaction flow during week two of first round of integrated testing.
- Helped troubleshoot Cerner orders not making it over to GE PACS.
- Medmined PSJMC (1 hour) – Attended weekly status meeting for this project on Tuesday 12/14.
- Datanex PMMC/PUSMC (1 hour) – Attended weekly status meeting for this project on Tuesday 12/14.
- CPACS Vascular Reports (1 hour) – Attended weekly status meeting for this project on Wednesday 12/15.
- Escription PSJMC (1 hour) – Attended weekly status meeting for this project on Thursday 12/16.
- CPACS Vascular Reports Interface – Continued development of the new e*Gate collaboration rule class to support the new “vascular” report formats planned for implementation in February 2011. Continued the design and coding required to support the report formats that contain “tables”. Generally, the width of the tables needs to be reduced and this requires separate handlers for each report section to ensure that the table widths are reduced but no table data or headings are lost or truncated.
- Escription ADT/Reports interface – Generally supported work on both the ADT and Reports interfaces. Spent the majority of the time working through issues to be aware of for the reports interface including “CC” functionality via OBR.28 along with handling of the dictated and transcribed fields in the OBR segment.
- Medmined PSJMC RX interface (4 hours) – Worked to complete the production implementation for this interface on Wednesday 12/15 and to send notification emails to the interface team and the project team after the go live was complete.
- Wealth Engine FTP interface – Received request to initiate work on this new FTP interface for a Meditech extract for sending to the Wealth Engine application. Received vendor FTP specifications and provided response with proposed plan for this interface development and implementation.
- Datanex FTP interfaces – While reviewing the production e*Gate logs for these interfaces identified a weakness in the Java collaboration rule class code for handling multiple input files. Completed fix to the code to ensure that the e*Gate Batch e*Way for Java handles multiple input files properly and implemented the change in production.
- Participated in Nexus Training from Medicity
- Assisted with getting CHS sign-off on Medicity Transcription Specifications
- Completed Provider Mapping for Application Testing (Star, IDX, Rad Teams)
- Created Inbox Delivery Rules for Application Testing (Star, IDX, Rad Teams)
- Documentation: Testing Status Report (SharePoint), draft version of CHS Roadmap PowerPoint
- Project related reporting and correspondence
- Completed deployment of MED_EMR_ORM to UCDAVISTEST01
- Coding Complete for EPIC_IDX_ORM/ORU
- Coding EMR_MEDITECH_ORU
- Medmined – Attended weekly status meeting for this project on Tuesday 12/7.
- Datanex – Attended weekly status meeting for this project on Tuesday 12/7.
- Escription – Attended weekly status meeting for this project on Wednesday 12/8.
- EPIC Transition Conference Call – Attended this conference call on Thursday 12/9 for project planning in light of the EPIC project starting in January 2011.
- CPACS Vascular Reports Interface – Continued development of the new e*Gate collaboration rule class to support the new “vascular” report formats planned for implementation in February 2011. Completed detailed research of existing e*Gate collaboration rule script for the original report format. Completed the implementation of all routing and transformation rules for the MSH through OBR segments to be in line with collaboration rule classes. Began the design and initial coding required to support the report formats that contain “tables”. Generally, the width of the tables needs to be reduced and this requires separate handlers for each report section to ensure that the table widths are reduced but no table data or headings are lost or truncated.
- Datanex NEBO “ub_04” file pull – Completed final work to ensure that the SyncCopy configuration was in place and functioning properly for both PMMC and PUSMC.
- State of Illinois Lead Reporting – Worked to identify and complete rename of the outbound FTP e*Way module for this interface to be in line with new e*Way naming conventions for Provena IS.
- Datanex FTP interface – Worked to identify the list of pending “historical” file extracts and associated FTP to Datanex. Also, completed FTP of five previously pending “historical” files to Datanex to the appropriate location on the Datanex FTP server.
- Medmined RX interface – Completed creation of the production implementation plan for this interface.
- Escription ADT/Reports interface – Generally supported continued work on both the ADT and Reports interfaces. Spent the majority of the time working through ETD related issues for the ORU/Reports interface.
- Medmined LAB interface – Generally supported continued work on this interface with focus on updating the filter rules for this interface to send ALL lab results instead of only a select list of lab results previously implemented via a data map based filter.
- Hill Rom Census Extract FTP interface– Received initial email request regarding this interface, completed some initial research and responded with detailed plan and approach for this new FTP interface.
- Continued Modification placed in the Medicity Novo Grid to address.
- Held Go-Live Assessment Meeting with Practice and Project Sponsor. All members in agreement to commence with Go Live.
- Downtime procedures for Entire Medicity Lab Results flow accepted.
- Practice decided to remove the Dental Group from the EMR go-live. Reasoning is there is very little activity for this group for Lab results and would eliminate the overhead required by the Practice itself.
- Interface specifications received from AllScripts for use in configuration of the Medicity NovoGrid.
- User acceptance document for GO-Live with GE Centricity signed off by Practice.
- Initial Medicity/Allscripts Interface Kickoff Meeting Held with Allscripts and Practice.
- Initial discussions started with Medent Ambulatory EMR for Medicity NovoGrid Implementation.
- Medicity Practice Planner completed for Allscripts EMR.
|
877.303.3377
The services provided by Orchestrate Healthcare will
allow us to meet the interfacing and data migration deadlines required
on a very large and critical implementation project.